Forgetec4x4 makers of steering guards, sump guards, jackable sills & ground anchors
Offroad Products-Winches, Accessories
Recovery Equipment
-Classified Adverts

OFFROAD PRODUCTS

Toughen up your Land Rover with steering guard, jackable sills and serious off road equipmentForgetec have been manufacturers to industry since 1984. We produce a range of high quality Off Road Products aimed mainly at owners of Land Rover Defenders, although we can undertake manufacture of bespoke items for other vehicles

Our products are made in house, our steelwork is galvanised to BS729 / ISO1461, this is far more durable than the zinc plated powder coated finishes offered by other manufacturers, we use marine grade Aluminium, and can produce products in stainless steel.

Besides our standard range we welcome enquiries for 'one offs' to suit individual requirements, we can also manufacture specific product ranges for other suppliers.

All prices are plus Carriage and VAT
Most Major Credit and Debit Cards Accepted

Alumnium Storage Boxes

new Chequer Plate Cubby Box new
new Chequer Plate Cubby Box new Chequer Plate Cubby Box
new Chequer Plate Cubby Box new roof box
new Chequer Plate Cubby Box new Chequer Plate Cubby Box

Chequer Plate Cubby Box

Chequer Plate Cubby Box Chequer Plate Cubby Box
Chequer Plate Cubby Box, fully TIG welded construction. Shown in diamond brite propellor pattern, can be supplied in 5 bar chequer plate or other material patterns if required.
ANY SIZE MADE TO ORDER
Cost 90.00 plus VAT.

Extra to powder coat black 25.00 plus VAT.

A taller version of the Chequer Plate Cubby Box made from 5 bar treadplate

A taller version of the Chequer Plate Cubby Box made from  5 bar treadplate


Aluminium Chequer Plate Tool Box

Aluminium Chequer Plate Tool Box
Toolboxes of various sizes fabricated to order

3 Point Competition Harness Cost each 35.00 plus VAT.

4 Point Competition Harness Cost each 37.00 plus VAT.

Defender Cup HoldersDefender Cup Holders.
Handmade from satin finish stainless steel, these cup holders clip directly onto the Land Rover Defender front shelf / dash, no drilling required. Please state TDi or TD5, lipped or tapered front shelf, when ordering.
Cost each 14.00 +VAT

Durable Steel Tool Boxes.
Ideal for expedition use - welded construction from 1.2mm thick steel, full lid on continuous piano hinge and secured by lockable double hasp and staple. Fitted with end lifting handles. Finish - powder coated grey
Sizes L x W x H (mm)
585 x 280 x 215
660 x 200 x 200
700 x 450 x 450
900 x 300 x 300
914 x 254 x 229
1065 x 500 x 380
1160 x 300 x 300
Prices upon application.
Security Chests, Van Strong Boxes, Site Boxes also available.

snorkel Bespoke Fabrications.
Any item produced to your requirements.



Stainless Grilles also available
When you need them - YOU NEED THEMJackable Sills - Defender 90
Inc Jack Points, hot dip galvanised, galvanised or powder coated. Various options.
PRICE ON APPLICATION



Steel steering guardAli steering guard Aluminium Steering Guards - Defender
8mm Marine grade alloy bash plate, with vent holes, hot dip galvanised 10mm laser cut steel mounting brackets with recovery eyes.
PRICE ON APPLICATION

Heavy duty all steel version.
PRICE ON APPLICATION



Be differentFront Grille - Defender
Attractive polished Aluminium grille to enhance the appearance of your Land Rover. Screws provided.
various options available please enquire.

Be different


Offroad Products-Winches, Accessories
Recovery Equipment
-Classified Adverts


Ground Anchors & Winch Mount

Ground AnchorsGround Anchor Kit - Flat Plate Type
Includes flat ground plates, forged drive in spikes and shackle. Hot dip galvanised.
130.00 plus VAT per kit

Ground Anchor stakesGround Anchor stake with T barGround Anchor - Tee Stake
Tee section stakes pointed, capped and drilled for shackle. Hot dip galvanised. T-Bar to aid removal and assist rope lashing.
With T-Bar: 19.50 each plus VAT

Strength when it's neededWinch Mount - Defender
Sits on top of standard bumper, bolts to chassis. Includes Recovery Eyes and Jack Points. Hot dip galvanised.
Universal Undrilled: 150.00 plus VAT Hot dip galvanised
Universal Undrilled: 120.00 plus VAT Plain steel to enable welding etc.

Strength when it's neededHeavy Duty Swivel Recovery Point
Fits on Defender rear cross member or front bumper. Can be bolted to any flat surface. Rotating centre allows shackle to turn in all directions: 45.00 plus VAT

Chequer Plate Products
Cut, folded, fabricated to your requirements.

GRP Traction & Bridging Ladders

GRP Traction & Bridging Ladders Manufactured using the highest quality Isophthalic chemical resistant polyester resins with pure glass fibre roving reinforcements and pigmented throughout. Produced in accordance with ISO 9001 certification.

25mm thick traction ladders (not for support)
270 x 1000
270 x 1220
310 x 1000
310 x 1220
310 x 1490
310 x 1990
Please check colour when ordering.

38mm traction/bridging ladders (suits most vehicles)
270 x 1000
270 x 1220
310 x 1000
310 x 1220
310 x 1490
310 x 1990
Please check colour when ordering.

50mm traction/bridging ladders (for heavy duty use)
260 x 975
260 x 1220
315 x 975
315 x 1220
315 x 1990
Please check colour when ordering.



Offroad Products-Winches, Accessories
Recovery Equipment
-Classified Adverts



Alloy Gear Knobs

Satin polished aluminium polished gear knobs Satin polished aluminium, universal fit for 5 speed & High / Low, Diff Lock. ALSO ENGRAVED GEAR KNOBS AVAILABLE, please enquire - PRICE ON APPLICATION


Land Rover Window Winders

Window winders Land Rover Window Winders (other models available). Anodised solid aluminium, TUV approved. PRICE ON APPLICATION, please enquire

Defender Polished Alloy Door Grab Handles

Defender Polished Alloy Door Grab Handles To go with our Window Winders. Supplied with stainless steel screws. 26.00 per pair plus VAT

Battery Cut Off Switch

simple and effective safety cut off switch and immobiliser. Fits in minutes.

Cost each 16.00 plus VAT

MACH-5 Wheels

Wheel spacers Available in self colour (bare steel) contact us for price and availability
Powder Coated at extra cost per wheel if required.
Various sizes available, standard, rolled edge or single/double beadlock.

6 Stud Beadlock 6 Stud Beadlock
16x8 Satin black 16x8 Satin black
16x8 std rim 16x8 std rim



Mach 5 On Road - no rolled edge
Mach 5 Off Road - rolled edge (for off road use only).
Mach 5 Single Beadlock - 3 piece, rolled edge, holds tyre one side.
Mach 5 Double Beadlock - 3 piece, rolled edge, holds tyre both sides.
Contact us for sizes available.
We also can offer to order 101 Flat Plate Centre, 7x16 plus 101 Mach 5.

4X4 Off Road Wheelspacers and Adaptors

Wheel spacers Improve turning circle, increase track, improve stability and tyre clearence. CNC Machined, supplied in sets of four and includes wheel nuts.

Landrover all models
Discovery series 1 & 2
Range Rover Classic
Forward Control
Toyota (most 6 stud models)
Mitsubishi
Daihatsu
Suzuki
G Wagon
Jeep (some models)
PLEASE PHONE FOR PRICES

Wheel spacers Wheel Adaptor Spacers
Landrover wheel onto G Wagon 220.00 plus VAT
Late Range Rover/Discovery alloy wheel onto Series 1 Discovery/Defender
PLEASE PHONE FOR PRICES

We supply wheel adaptors to allow fitment of various wheel combinations to Landrover, Range Rover and Discovery.

Please state year and model of vehicle, and wheel type to be fitted, when ordering.

Aluminium Chequer Plate Storage Box

Wheel spacers Fits on top of Land Rover Wheel Arch, fully TIG welded with continuous 'piano' hinged lid, 2 lockable clasps, 2 optional end handles. Any size to order.
Length shown 860mm

All prices are plus Carriage and VAT
Most Major Credit and Debit Cards Accepted


Offroad Products-Winches, Accessories
Recovery Equipment
-Classified Adverts


Forgetec Engineering
Clays Road, Sling, Coleford, Glos, GL16 8LJ
Visitors by appointment please
Tel: 01594 835363
Email: sales@forgetec4x4.co.uk


Design & Hosting by: 4x4web